Balances

Balances are an essential component of any academic science lab. Flinn Scientific has numerous resources in proper use, maintenance tips and care to help extend the use of your balance.

Flinn Triple Beam Balance Operating Instructions

Operating instructrions for the Flinn Triple Beam Balance OB2181

Flinn Economy Choice Balance Series Owner's Manual

Flinn Economy Choice Balance Series Owner's Manual for OB2163 and OB2164.

uL Error Code Troubleshooting Guide

Calibration and zero-points for electronic balances are set during manufacturing. If you see a "uL" error code, then it is likely that the zero-point has shifted or the calibration factor has been lost. This should not be a reoccurring problem, however, it is a good idea to calibrate the balance once a week especially for balances that are used often or have milligram specificity.

Flinn Triple Beam Balance Operating Instructions

Owner's manual and operating instructions for the Flinn Triple Beam Balance.

Resetting Flinn Electronic Balances

The basics of resetting a UL message for OB2138, OB2139, OB2140, OB2141, OB2142 and OB2143 Flinn Electronic balances will be covered in this instruction sheet.

Note: This document applies to the above reference balances purchased before January 2020.

Calibrating Flinn Scientific Balances

The basics of calibrating Flinn Scientific electronic balances will be covered in this instruction sheet. These instructions apply to OB2090, OB2093, OB2094, OB2095, OB2096, OB2097, OB2088, and OB2089.

Calibrating Old Flinn Scientific and Ohaus Scout II Balances

The basics of calibrating old Flinn Scientific electronic balances (purchased before 2006) and Ohaus Scout II balances will be covered in this instruction sheet.

Address	Flinn Scientific Canada, Inc. 175 Longwood Road South Hamilton, ON L8P 0A1
Phone	844-200-1455
Fax
Email	flinn@flinnsci.ca